Further enhanced speed The rapid traverse rate is fastest in its class (X axis: 18 m/min, Z axis: 24 m/min). The Z-axis motor output is improved, thus increasing the drilling capacity by 20% (compared to the previous model). Loading system selection according to user specifications In addition to our reputable Σi loaders, the new F loaders with higher operability and speed can now be selected. The FC60 loader has a rapid traverse rate of 120 m/min on both the traverse axis and the vertical axis. This achieves a loading time of 2.8 seconds. The control screen of the FC60 loader specification is a 10.4-inch touch panel type with excellent operability, and incorporates various functions, such as an automatic teaching function.

Space savings Four standard tools can be mounted. The machine width of 480 mm is realized while securing an X-axis stroke of 160 mm. With the 2-unit linked specification, the dimension of each line in the width direction is halved. Production lines are made more efficient and simpler, it is easy to have a lot of units, and lines can be constructed flexibly. In pursuit of high-precision cutting The built-in spindle with "zero-center design" lessens the relative displacement of the spindle unit and achieves greater cutting accuracy.

An 8-inch chuck small-width, space-saving machine We have achieved the smallest machine width in the industry at 1,250mm and installation area of 1.85m2 with the 8-inch chuck specification. The smaller machine footprint contributes to increased factory productivity. Superior machining chip processing We have kept the machining cutting drop hole area the same as that of the ″X-150″, even while reducing the machine width by 20%, and we have achieved smooth chip flow.

Offering both cutting performance and compactness The high-rigidity spindle with φ100 mm bearings is equipped with a high-output (15/11 kW) spindle motor. Square box-way slides are adopted in addition to the established robust machine construction, so heavy-duty cutting capability and accuracy can be maintained over long periods. The compact design offers a machine opening of 1,695 mm while assuring sufficient stroke for shaft work with a Z-axis travel of 450 mm. (The machine width is comparable to single-turret TAKAMAZ lathes) Diverse options supporting shaft work, and labor savings at setup changes The tailstock unit adopts a new, highly rigid construction, and develops powerful thrust using hydraulic drive. While tailstock motion is driven hydraulically, the position is linked to the cutting program by constant detection, helping to reduce the man-hours spent on setup work. The center rest unit’s workpiece support position can be configured as required using motor drive, while there is a full range of other options providing further support for high-load cutting, including φ120 mm spindle bearings and an MT-5 tailstock. (XTT-500)

10-station turret equipped as standard Two 10-station turrets are installed to increase the number of tools that can be accommodated for better production efficiency. Longest stroke in the two-spindle series Slide strokes of 170 mm on the X axis and 270 mm on the Z a xis achieve the maximum O.D. turning zone in the TAKAMAZ two-spindle series. Even workpieces that require cutting deep into the I.D. at the same time, such as differential cases and brake calipers, can be handled.

High-precision polygon machining With the conventional milling machines and others of this type, the grinding is done for every index to shave workpieces with many sides. On this machine, the features of a lathe are implemented. The tool and workpiece are both rotating for immediate finish. This results to short cycle time and a very accurate polygon cutting is possible. Greatly increased productivity On polygon cutting, processing operation does not require indexing. Comparing with cutting process and other methods that require interpolation and polar coordinate, C indexing + Y-axis, this process reduces the cutting significantly.

High-speed servo turret substantially cuts idle time. The rigidity of the 10-station drum turret used on the machine has increased through a uniform, balanced design, making it capable of continuous full operation. The turret rotation speed of 0.2 seconds per index is one of the fastest available. Compact design with integral loader for high-efficiency operation. The exceptional total balance that has been achieved by integrating the loader with the machine has lead not only to high productivity but also a broad range of other benefits including space savings and joint maintenance during after service.

Surprisingly compact thanks to incorporation of a 4-inch, gang type, built-in motor spindle!! A machine with advanced functions spec ialized in small part production makes its debut.

Ideal machine construction for shaft work The unique 1-spindle 2-turret and servo-controlled tailstock configuration dramatically improves shaft work productivity. The X-axis stroke is set to max. 115 mm. Crankshafts up to 700 mm long can also be handled. (Some restrictions apply) Increased productivity with high efficiency machining The cycle time is shortened by balance cutting with symmetrical twin turrets, and simultaneous left/right individual machining. Added to that, adoption of a 10-station turret gives leeway in the tool layout.

CNC Automatics Turning Center The Economic Way of Complete Machining, Turn & Mill Power Tools Turret, Counter Spindle, X/Z Slide and Back Machining - Best value, versatile machine available for all production shops. - Main spindle with infinite indexing, C-axis FUNCTION. - Several different arrangements to match your needs. - Short or oil-film automatic long bar feeder available as option.