M80X MILLTURN

<!--StartFragment--> <h2>Highlights at a glance</h2> <ul><li>150 bar coolant pressure</li><li>Tool change in any Z-axis position</li><li>Heavy drilling and boring</li><li>Gear hobbing</li><li>Workpiece transfer</li><li>Active B-axis</li></ul> <!--StartFragment--> <h2>U-Axis</h2> <p>The use of driven tools with additional NC drive such as facing heads (D´Andrea) or special boring bars for seat pocket machining (e.g. Cogsdill, ITS) requires an additional NC axis. WFL offers such an axis (U-axis) as an option. Even after the integration of this U-axis, the option of angular machining remains. This option can offer enormous cost reduction potentials, especially for the aerospace industry as well as for manufacturers in the oil and gas industry. In order to ensure the necessary stability, only the prismatic tool interface is used to accommodate tools on the U-axis. Automatic tool change is carried out either via the pick-up magazine or the prismatic tool changer.</p> <ul><li>Manufacturing of pockets (seat pocket)</li><li>Internal machining with damped boring bar</li><li>CNC special contour boring bar (radial feed out using the U-axis)</li><li>Deep hole drilling with automatic coolant docking</li><li>Internal milling with angular head</li><li>CNC facing head for complex spindle operations</li></ul> <!--EndFragment--> <!--EndFragment-->